Veterinary X-Ray Failsafe Specialists
Veterinary X-Ray Fail-Safe Warning Light Systems Supplied & Installed
Innovative X-Ray Fail-Safe Warning Light Solutions
Customised System Design
Efficient Installation & Maintenance
Efficient Installation & Maintenance
Our in-house team will liaise with yourselves and also your Radiation Protection Advisor (RPA) to tailor a solution that will satisfy your practice needs, your RPA and the HSE's requirements.
We can also install isolators, emergency stops and trigger extensions to improve your existing X-Ray installation.
Efficient Installation & Maintenance
Efficient Installation & Maintenance
Efficient Installation & Maintenance
Our team of experienced technicians have carried out over 400 installations (and counting) and provide efficient installation and maintenance services for all types of X-Ray failsafe warning light systems, they are well versed with the busy and critical nature of an operating practice and will work with your staff to ensure a pleasant and convenient experience.
We use advanced technologies and equipment to deliver high-quality results.
Documentation
Efficient Installation & Maintenance
Training, Support & Aftercare
We provide post install documentation with every installation for your records and to satisfy your RPA and the HSE.
This document will show the layout of the system, as fitted photos and X-Ray Suite. Operation, Isolation, testing and maintenance instructions.
Training, Support & Aftercare
Training, Support & Aftercare
Training, Support & Aftercare
We offer comprehensive training and support services to our clients, ensuring that they have the knowledge and skills they need to operate and test their Failsafe Warning Light systems.
We also offer remote support to our clients and have an impeccable success rate of rectifying almost every issue over the phone or a video call.
If the issue isn't able to be rectified remotely we have a national team of engineers so we are never far away!
We offer annual servicing and aftercare packages to ensure ongoing efficiency and reliability of your X-Ray Failsafe Warning Light systems.
Our solutions are tailored to meet the specific needs of each client.
Compliance & Safety
Training, Support & Aftercare
Compliance & Safety
We prioritize compliance and safety in all of our electrical engineering services, ensuring that our clients meet all regulatory requirements and standards including the Ionising Radiations Regulations 2017 (IRR17) .
Our team stays up-to-date on the latest safety protocols and regulations to provide the highest level of service.
We are also SafeContractor accredited and NICEIC Approved Contractors.
National Coverage
Training, Support & Aftercare
Compliance & Safety
We truly do cover the whole of the UK!
Our Team of 26 Field engineers are busy every working day maintaining and installing X-Ray FailSafe Warning Light Systems between John O'Groats to Land's End... as they say!
Expert Failsafe Installation Services
Our team are well versed in all types of X-Ray Failsafe Warning Light Systems and general electrical systems in the Veterinary Sector.
If you have already purchased an X-Ray Failsafe Warning Light/system, we can still help!
We professionally install manufacturers lights & systems. We have helped multiple practices out where they have purchased a warning light from the manufacturer but then have struggled to find a willing, competent or experienced electrician.
We can also liaise with your Radiation Protection Advisor (RPA) and plan your installation with their input.
Let us take the compliance headache away and manage your installation!
Ready to get started?
Contact us today to learn more about our services and how we can help your practice stay compliant.
X-Ray Failsafe Systems for all Types of Radiography
Critical Care
Critical Care Changeover
Critical Care Changeover
Our best seller! This is our flagship system,
its almost like two warning lights built into one light fitting/housing so you will never be without a working warning light.
This system has a built in 'back up' so if the primary warning light fails, the secondary warning light automatically takes over to ensure you can still operate your X-Ray generator.
This system is best suited to busy/critical X-Ray Suites where an X-Ray generator would be a huge issue if it was offline.
This system typically replaces your existing isolator and can incorporate emergency stops too.
This system can also control an unlimited amount of warning lights, great for X-Ray suites with multiple entrances. So you only have to buy one system and add as many lights as you need.
This System is suitable for all X-Ray generators except CT/LINAC.
This system will serve:
Single Phase Generators Up to 100 amps
Three Phase Generators Up to 100 amps
Dental Generators Up to 100 amps
Critical Care Changeover
Critical Care Changeover
Critical Care Changeover
Exactly the same as our Critical Care System except it incorporates a 'changeover' switch for X-Ray Suites that have more than one X-Ray generator in.
As per the IRR17 regulations and RPA advice - two X-Ray generators cannot operate/expose at the same time.
Great for suites with general and dental X-Ray in the same room.
Again, this system comes with all the same benefits as our Critical Care System.
This system typically replaces your existing isolator and can incorporate emergency stops too.
This System is suitable for all X-Ray generators except CT/LINAC.
This system will serve:
Single Phase Generators Up to 100 amps
Three Phase Generators Up to 100 amps
Dental Generators Up to 100 amps
Standard
Critical Care Changeover
Failsafe LITE
A scaled back version as our Critical Care System, this system does not incorporate the backup system found in our Critical Care Systems. If the warning light should fail, the X-Ray Generator will be offline until the warning light/components are replaced.
This System is suitable for all X-Ray generators except CT/LINAC. We generally fit these systems into practices with more than X-Ray suite and/or less busier practices where an X-Ray generator offline for a day or two won't cause too many issues.
This system typically replaces your existing isolator and can incorporate emergency stops too.
This system will serve:
Single Phase Generators Up to 20 amps
Three Phase Generators Up to 20 amps
Dental Generators Up to 20 amps
Failsafe LITE
Equine/Portable X-Ray
Failsafe LITE
Our least expensive, no thrills system. Perfect to keep you compliant with IRR17 on a budget.
This system fits inline with your existing X-Ray electrical installation and replaces your existing warning lights.
This system is suitable for single phase systems up to 13 amp such as small animal and dental generators.
We generally fit these systems into practices with more than X-Ray suite and/or less busier practices where an X-Ray generator offline for a day or two won't cause too many issues.
This system will serve:
Single Phase Generators Up to 13 amps
Dental Generators Up to 13 amps
CT/LINAC
Equine/Portable X-Ray
Equine/Portable X-Ray
As the title really, these systems are tailored to your existing CT/LINAC electrical installation and replace your two stage warning lights.
We work with most manufacturers such as GE & Siemens to interface our system with their gantries to block exposure if the warning lights should fail.
This system has the same built in 'back up' as our Critical Care Systems, so if the primary warning light fails, the secondary warning light automatically takes over to ensure you can still operate your X-Ray generator.
Equine/Portable X-Ray
Equine/Portable X-Ray
Equine/Portable X-Ray
We can also tailor our solutions to cover larger equine settings and practices/controlled areas that utilise portable X-Ray Generators.
About X-ray Failsafe
.jpeg/:/rs=w:1240,cg:true,m)
Our Services
We manufacture and install X-Ray Fail-Safe Warning Light Systems for all types of Human & Veterinary X-Ray Radiology.
We design and build our own solutions. Whether you require a Fail-Safe Warning Light System for a portable generator, dental generator, equine setting, capacitor fed generator, table based generator, CT scanner or even a linear accelerator (LINAC) We have a suitable solution for you!
Electrical Services - Not just a pretty Failsafe....
Our Story
Our Services
Our Vision
Our Parent Company, Countynet Ltd Was founded in 2011 and was predominately an Electrical and Structured Cabling Contracting Company - Installing Electrical and network cabling solutions to various corporate/multi-site clients all over the UK.
We branched out into the Veterinary Sector in 2018 and have built on our electrical experience t
Our Parent Company, Countynet Ltd Was founded in 2011 and was predominately an Electrical and Structured Cabling Contracting Company - Installing Electrical and network cabling solutions to various corporate/multi-site clients all over the UK.
We branched out into the Veterinary Sector in 2018 and have built on our electrical experience to provide electrical installations and maintenance to over 600 Veterinary practices in the last 6 years. So you can be assured we understand your practice needs and operation.
Our Vision
Our Services
Our Vision
Our vision is to be the leading provider of electrical engineering services to the veterinary sector, known for our innovative solutions and exceptional customer service. We strive to exceed our clients' expectations and provide them with the best possible experience.
Our Services
Our Services
Our Services
We offer a wide range of electrical engineering services, including power distribution, lighting design, renewable energy solutions, network infrastructure and more. Our team of engineers has the expertise to handle projects of all sizes and complexities.